400-9662-958

Photovoltaic Test Products

Location：Home > Photovoltaic Test Products > Subassemblies > Outdoor sun exposure test system model: CHT-H206

Yanzhi Outdoor sun exposure test system model: CHT-H206

Apply

Meet: IEC61215-MQT 02, MQT 04, MQT 05, MQT 06, MQT 07, MQT 08, MQT 09, MQT 19; IEC61730-MST 02, MST 03, MST 21;

UL1703-19,20,IEC61853.

Online Contact
  • Product Features
  • Technical Parameters

1) Environmental parameters such as irradiance, ambient temperature, wind speed and wind direction can be monitored and recorded;

2) For the NMOT test, the computer screened the data, simulated the curves, and obtained the NMOT data. Set the recording conditions to meet the requirements specified in the standard. The position of the environmental sensors is installed according to the IEC 61730 standard. Set up the bracket and the blackboard according to the IEC requirements. Lay out the temperature test line according to the IEC requirements;

3) For temperature tests, components are installed and arranged as required, with each component to monitor the temperature of the test point;

4) The power generation of the solar module is calculated by scanning the module IV curve, electronic load or inverter and DC power collection. Record the power generation of the components for a long time;

5) By scanning the IV curve of the component, calculate the power of STC according to the temperature, irradiance, wind speed and other data, and evaluate the attenuation of the long-term operation of the component;

6) The temperature coefficient of the individual parameters of the components is calculated;

7) Performance at low irradiance was obtained by tracking IV curve data, combined with parameters such as irradiance and temperature.

Model

CHT-H206

Irradiatometer

kippzonen CMP10

Wind speed wind direction meter

Wind speed range

0-40m/s

Wind speed resolution

0.01m/s

Wind direction range

0-359.9°

Wind direction resolution

0.1°

Ambient temperature

Scope

-40～80℃

Accuracy

±1℃

Resolution ratio

0.1℃

Component temperature

Scope

-50～200℃

Accuracy

±2℃

Resolution ratio

0.1℃

IV tester

current range

0-30A

Current resolution

1mA

Current accuracy

0.05%+0.05%FS

voltage range

0-500V

Voltage resolution

10mV

voltage accuracy

0.05%+0.25%FS

IV curve time

＜500ms

Number of IV curve points

＞200

Inverter (micro-inverse)

peak voltage

60V

MPPT voltage range

16-48V

maximum current

20A

power rating

750W

DC voltmeter

rank

Level 0.5

voltage

1500V

Current diverter

Precision level

Level 0.1

current range

0-20A@75mV

Support

material quality

C merchant steel

lampstand

Removable cement pier

NMOT support

selectable

Temperature test bracket

selectable

IPC

ADVANTECH

Solutions

 IEC61215

IEC61730

BIPV
Name*
Company
Email*
Telphone*
I am interested in receiving information about*
Please select a product
  • Two-dimensional image instrument
  • Acetic acid test box Model: CHT-YW 400
  • High pressure Accelerated aging test box Model: CHT-HAST-800
  • 3D microscope
  • Differential Scanning Calorimeter (DSC) Model: CHT-CS300
  • Spectrophotometer Model: CHT-3400
  • Fourier transform infrared spectrometer model: CHT-H8030
  • Photovoltaic welding strip stripping force testing machine
  • Photovoltaic welding strip stripping force integrated machine
  • Universal material testing machine
  • Full-spectrum Ellipsometer Model: CHT-TP 01
  • Step instrument
  • Water vapor transmission and filtration rate Model: CHT-40B
  • No-rotor vulcanizer model: CHT-LH 06
  • Atomic force microscope Model: CHT-AFM
  • Solar cell TLM grid line contact resistance analyzer model: CHT-6070 TLM
  • Battery cell light aging box Model: CHT-DCPBBA
  • Photovoltaic cell PL detector model: CHT-80D
  • Scan four-probe square resistance meter Model: CHT-4500 RH
  • Solar cell quantum efficiency test system Model: CHT-QE2501
  • Contact Angle Tester Model: CHT-JCJ 03
  • PV Module Damp Heat, Freeze-Thaw Test Chamber Model: CHT-19-12-3
  • Hot and heat test box Model: CHT-19-12-2
  • Thermal cycle environment test box Model: CHT-19-12-3
  • Optical aging stability test box Model: CHT-1800
  • Steady-state simulation test box Model: CHT-WTBBA
  • UV accelerated aging test box Model: CHT-UVDC28
  • Current Continuity Test System Model: CHT-11D
  • Diode Thermal Performance Test System Model: CHT-12D
  • Pulse voltage test system Model: CHT-14D
  • PV Module Salt Spray Corrosion Test Chamber：CHT-16D
  • Optical senescence test box / photovoltaic module test LID: CHT-18D
  • Insulation withstand voltage tester Model: CHT-2813W
  • Wet leakage test system Model: CHT-3621W
  • Outdoor sun exposure test system model: CHT-H206
  • Dynamic Load Test Machine Model: CHT-20D
  • Static load test machine model: CHT-26D
  • PID Test System Model: CHT-PID
  • Hail tester Model: CHT-28D
  • Component crushing tester Model: CHT-30D
  • Grounding continuity Tester Model: CHT-2813W
  • Lead end strength test machine Model: CHT-31
  • Appearance table Model: CHT-W26
  • Drop ball impact test machine Model: CHT-10
  • HD Microscope model CHT-6880
  • Photovoltaic welding strip stripping force testing machine
  • photovoltaic welding strip stripping force integrated machine
  • Universal material testing machine
  • Photovoltaic glass four-point bending test machine model: CHT-4 WQJN
  • Crosslinking degree test System Model: EVA-CC
  • 2nd element image instrument model: CHT-3020
  • Photovoltaic laminated multi-circuit temperature：CHT-16
  • Scratch tester Model: CHT-H12
  • Nondestructive Test System Model: CHT-WSEVA
You can just scan the code for details